SKU: 24315

MFRC522 RFID Module Read/Write (13.56MHz)

MFRC522 RFID Module Read/Write (13.56MHz)

  • 13.56MHz RFID module
  • Operating voltage: 2.5V to 3.3V
  • Communication : SPI, I2C protocol, UART
  • Maximum Data Rate: 10Mbps
  • Read Range: 5cm
  • Current Consumption: 13-26mA
  • Power down mode consumption: 10uA (min)

110,00 EGP

In stock

Add to Wishlist
Add to Wishlist
SKU: 24315 Category:

Description

MFRC522 RFID Module Read/Write (13.56MHz)

The MFRC522 RFID Module is a 13.56MHz RFID module that is based on the MFRC522 controller from NXP semiconductors. The module can supports I2C, SPI and UART and normally is shipped with a RFID card and key fob. It is commonly used in attendance systems and other person/object identification applications.

Features:

  • 13.56MHz RFID module
  • Operating voltage: 2.5V to 3.3V
  • Communication : SPI, I2C protocol, UART
  • Maximum Data Rate: 10Mbps
  • Read Range: 5cm
  • Current Consumption: 13-26mA
  • Power down mode consumption: 10uA (min)

Applications:

  • Automatic billing systems
  • Attendance systems
  • Verification/Identification system
  • Access control systems

Pin Configuration:

Pin Number Pin Name Description
1 Vcc Used to Power the module, typically 3.3V is used
2 RST Reset pin – used to reset or power down the module
3 Ground Connected to Ground of system
4 IRQ Interrupt pin – used to wake up the module when a device comes into range
5 MISO/SCL/Tx MISO pin when used for SPI communication, acts as SCL for I2c and Tx for UART.
6 MOSI Master out slave in pin for SPI communication
7 SCK Serial Clock pin – used to provide clock source
8 SS/SDA/Rx Acts as Serial input (SS) for SPI communication, SDA for IIC and Rx during UART

 

Specification:

  • Product Name:  IC Card Sensor Module
  • Material: Plastic
  • Color: Blue & White
  • Module Size: 58mm x 40mm
  • Card Size: 83mm x 52mm
  • Key Length: 37mm
  • Working Current: 13-26ma/Dc 3.3v
  • Idle Current: 10-13ma / Dc 3.3v
  • Sleep Current: <80ua
  • Peak Current: <30ma
  • Working Frequency: 13.56mhz
  • Environmental Working Temperature: -20-80 Degrees Celsius
  • Environmental Storage Temperature: -40-85 Degrees Celsius
  • Relative Humidity: 5%-95% Relative Humidity
  • Data Transmission Rate: Up To 10mbit/s
Package includes:
  • 1 x MFRC522 RFID Module
  • 1 x the standard S50 blank card
  • 1 x S50 special-shaped card a (as shown by the key ring shape)
  • 2 x straight, curved rows of pin of the article

Related Products:

Reviews

There are no reviews yet.

Be the first to review “MFRC522 RFID Module Read/Write (13.56MHz)”