SKU: 24468

STM32F030C8T6 Minimum System ARM Development Board Module

STM32F030C8T6 Minimum System ARM Development Board Module

  • the board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power supply circuit.
  • the core board is divided into two rows leads to all the I / O port.
  • with SWD simulation debug download interface, simple and convenient, debugging speed.
  • RTC crystal Epson brand, easy to start, more stable.

125.00 EGP

In stock

Add to Wishlist
Add to Wishlist
SKU: 24468 Category:

Description

STM32F030C8T6 Minimum System ARM Development Board Module

  • the board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power supply circuit.
  • the core board is divided into two rows leads to all the I / O port.
  • with SWD simulation debug download interface, simple and convenient, debugging speed.
  • the use of the Micro USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary Andrews mobile phone charger interface.
  • RTC crystal Epson brand, easy to start, more stable.
  • with double pin, but the pin does not default welding, the user according to their own application scenarios to choose their own welding direction. If welding is required, please tell the owner. Keil can be used to compile, IAR compiler, can be downloaded through the J-Link or USART1 procedures, the procedures are the owner and debugging procedures, there are problems can consult the owner.

Chip features

  • Core: Arm® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz
  • Memories
    • 16 to 256 Kbytes of Flash memory
    • 4 to 32 Kbytes of SRAM with HW parity
  • CRC calculation unit
  • Reset and power management
    • Digital & I/Os supply: VDD = 2.4 V to 3.6 V
    • Analog supply: VDDA = VDD to 3.6 V
    • Power-on/Power down reset (POR/PDR)
    • Low power modes: Sleep, Stop, Standby
  • Clock management
    • 4 to 32 MHz crystal oscillator
    • 32 kHz oscillator for RTC with calibration
    • Internal 8 MHz RC with x6 PLL option
    • Internal 40 kHz RC oscillator
  • Up to 55 fast I/Os
    • All mappable on external interrupt vectors
    • Up to 55 I/Os with 5V tolerant capability
  • 5-channel DMA controller
  • One 12-bit, 1.0 μs ADC (up to 16 channels)
    • Conversion range: 0 to 3.6 V
    • Separate analog supply: 2.4 V to 3.6 V
  • Calendar RTC with alarm and periodic wakeup from Stop/Standby
  • 11 timers
    • One 16-bit advanced-control timer for six-channel PWM output
    • Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding
    • Independent and system watchdog timers
    • SysTick timer
  • Communication interfaces
    • Up to two I2C interfaces
    • Up to six USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection
    • Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames
  • Serial wire debug (SWD)
  • All packages ECOPACK®2

Package Includes:

  • 1x STM32F030C8T6 Minimum System ARM Development Board Module

Related Products:

Chip datasheet:

Reviews

There are no reviews yet.

Be the first to review “STM32F030C8T6 Minimum System ARM Development Board Module”