SKU: 22770

USB to TTL Converter Module CH340G

USB to TTL Converter Module CH340G

  • Dual 3.3V and 5V Power output, work with 3.3v and 5v target device.
  • Operating current typ. 12 mA up to 30mA
  • Clock-frequency typ. 12MHz.
  • Power-on reset time typ. 20ms up to 50ms
  • USB A Connector (male)
  • Three indication LEDs (from top to bottom): “Power”, “TxD”, “RxD”.
  • Transmitter baud rate error less than 0.3%
  • Receiver baud rate tolerance < 2%

51,75 EGP

In stock

Add to Wishlist
Add to Wishlist
SKU: 22770 Category:

Description

USB to TTL Converter Module CH340G

CH340 chips are a series of USB bus adapters, that provides serial, parallel or IrDA interfaces over USB bus (only serial interface).
The CH340G integrate circuit provides common MODEM signals to allow adding a UART Devices to a computer, or converting existing UART devices to USB interface.
It’s a small USB to TTL serial tool, using the CH340G chip. You can use it to connect some serial device to your PC via USB port.

Features:

  • Provides a virtual serial port over USB 2.0 port
  • Full speed 2.0 USB interface
  • Based on 340G chip
  • Supports operating systems: Windows / Linux /  Mac OSX
  • Supports baud rates from 50bps up to 2Mbps
  • Supports CH341 driver
  • Dual 3.3V and 5V Power output, work with 3.3v and 5v target device.
  • Operating current typ. 12 mA up to 30mA
  • Clock-frequency typ. 12MHz.
  • Power-on reset time typ. 20ms up to 50ms
  • USB A Connector (male)
  • Three indication LEDs (from top to bottom): “Power”, “TxD”, “RxD”.
  • Transmitter baud rate error less than 0.3%
  • Receiver baud rate tolerance < 2%

Applications:

  • Debug purpose in the development
  • Microcontroller to PC communication
  • Programming related purposes

Package Includes:

  • 1x USB to TTL Converter Module CH340G

Datasheet:

Related Products:

 

Reviews

There are no reviews yet.

Be the first to review “USB to TTL Converter Module CH340G”